Winzer

1/4 Inch X 4 Inch Steel Titen Hd Concrete And Masonry Screw Anchor - 50 per Box

Item 908.01.14.4.1

We Stand Behind Our Products

If you are not satisfied, return within 90 days for a full refund.

Description

A high-strength screw anchor for use in cracked and uncracked concrete as well as uncracked masonry. The Titen HD offers low installation torque and outstanding performance. The Titen HD screw anchor is designed for a wide variety of applications such as sill plates ledgers post bases seating and other holdown applications. The screw anchor is easy to remove when used in temporary applications such as bracing and formwork or when a fixture needs to be relocated.

  • Higher load capacity and vibration resistance threads along the length of the anchor undercut the concrete and efficiently transfer the load to the base material
  • Vibration and shock resistance - the mechanical interlock of the threads and the ratchet teeth on the underside of the head help prevent the anchor from loosening in vibratory conditions. the titen HD anchor has been tested to 12.6 million vibratory cycles with no performance reductions
  • Specialized heat treating process - creates superior surface hardness at the tip to facilitate cutting while at the same time not compromising ductility within the anchor body
  • Less spacing and edge distance required - the anchor does not exert expansion forces on the base material
  • Easy post-installation inspection of the head is stamped with theSimpson Strong-Tie? ? sign and the anchor length in inches
  • No special drill bit needed - designed to install using standard sized ANSI tolerance drill bits
  • Installs with 50% less torque - testing shows that when compared to competitors the titen HD requires 50% less torque to be installed in concrete
  • Hex washer head requires no separate washer and provides a clean installed appearance
  • Ideal for temporary anchoring (e.g. formwork bracing) or applications where fixtures may need to be moved
  • Re-use of the anchor to achieve listed load values is not recommended
  • Heat treated material

Customers Also Viewed

Recently Viewed