Skip to product information
1 of 2

Photographs are representational and may not be size accurate.

Winzer

1-7/8 Inch Black Phosphate Carbon Spring Steel Internal Housing Ring

Item 437.178

We Stand Behind Our Products

If you are not satisfied, return within 90 days for a full refund.

Description

From cap screws to hitch pins we are a master distributor for fasteners of all types. Available in inch and metric sizes we are your single source solution. Additionally we offer both domestic and imported options for most fastener types.

  • Plating = Phosphate
  • Material = Carbon Spring SteelAllowable Corner Chamfers: 0.050 Inch
  • Allowable Corner Radii: 0.064 Inch
  • Clearance Diameter Compressed in Housing: 1.370 Inch
  • Clearance Diameter Released in Groove: 1.480 Inch
  • Edge Margin: 0.171 Inch
  • Finish: Black Phosphate
  • Gap Width: 0.430 Inch
  • Groove Depth: 0.057 Inch
  • Groove Diameter: 1.989 Inch
  • Groove Diameter to Shaft Concentricity: 0.005 Inch
  • Groove Diameter Tolerance: +/-0.005
  • Groove Width: 0.068 Inch
  • Groove Width Tolerance: +0.004/-0.000
  • Hardness: HRC 47-52
  • Hole Diameter: 0.093 Inch
  • Hole Diameter Tolerance: +0.015/-0.002
  • Item: Internal Housing Ring
  • Lug Height: 0.234 Inch
  • Lug Height Tolerance: +/-0.005
  • Material: Carbon Spring Steel
  • Maximum Section: 0.170 Inch
  • Maximum Section Tolerance: +/-0.007
  • Measurement: Inch
  • Minimum Section: 0.085 Inch
  • Minimum Section Tolerance: +/-0.007
  • Radial Wall Thickness: 0.085 - 0.170 Inch
  • Ring Free Diameter: 2.072 Inch
  • Ring Free Diameter Tolerance: +0.035/-0.025
  • Shaft Diameter: 1-7/8 Inch
  • Thickness: 0.062 Inch
  • Thickness Tolerance: +/-0.003
  • Type: Stamped

Photographs are representational and may not be size accurate.

Key Specifications
Diameter 1-7/8 Inch
Material Spring Steel
Measurement Inch
Retainer Type Internal Retaining Ring

Customers Also Viewed

Recently Viewed